ski-doo 850, ski-doo 850 summit, ski-doo 850 clutch kit, ski-doo 850 clutching, Dynamo Joe Clutch kit, Dynamo Joe Clutching, Ibackshift clutch kit, Ib

Product Specifications


If Paypal, then email me at my contact box.

You have installed a track other than stock - please tell me what top gear you have (if you know)


Ski Doo Clutch kit for 850 Renegade G4 2017~newer (137~146) x (1.25~2.5") lug (One point two five ~ two point five track) with 968 low elevation ramps.  This kit can be used from sea level to 13000 feet. 

Kit designed for 25, 24, 23, 22, 21-45 or 23:51 gearsets or lower.  You can use down to 19-53 if you like.



This is you...
You are standing looking at the hill with fresh unbroken snow.  For most Rene's, making that hill is an accomplishment.  Yesterday it was unbeatable by you.  A few more mph track speed and I know I could do it.  But that was yesterday. 

Youll make that hill today because especially for you, we made this kit.  Today you stand at that hill with the clutch kit designed to give more than a few mph track speed  youll see at least 3.  In every area you go to there is a hill like that and when you beat it, youll find it being beaten with the help of this clutch kit.

  • In 5 minutes, a quick tune with the change of a bolt and spacer.
  • Cooler clutch and belt temperature
  • Smoothest engagement
  • Quicker backshift
  • Strongest engine braking
  • More track speed
  • Pulls hard to the finish.

You made it...


This is the strongest pull to 80+mph you ever felt with your sled.

The kit digs deep, pulling out all the muscles from the engine.  It has the ability to make them useful not only wherever, but however you run your sled.

Tight connection between your thumb and snow.  Drive the clutching as smart as you want.  A fast trail rider's delight.  And when you see some fresh snow, pull off into it and stay on top of it.  When you're done, back on the hardpack.

Throttle control
Feather smooth engagement for slow speeds.  The handlebars dont surge, tugging on your hands.  Blip the throttle, time it right, do a victory wheelie.  You'll burst more track speed for the next pull.

Pulls hard
When you want to drive more aggressive, the feeling is like having a gigantic hand on the front bumper, pulling you past your riding friends. "woo hoo" and then look back at them to see how far they are behind before you let off throttle. 

When you need the power to overtake your buddy, there is more power on tap to speed up and pass.  30, 50, 60+mph side by side, smash that throttle, pull away strong to the finish.

Good mileage
Drive the clutch kit with the same fuel economy as stock clutching, most times even better.  With the low revving at part throttle, high torque feature when you need to drive for fuel economy on the way out >> Drive it gently and you will be rewarded with lower fuel consumption at part throttle, arriving back at the trailer.

There is more engine power under your thumb, just waiting to be used.

Kit parts

  • 100/360 Dalton primary spring (2700 engagement speed SMOOTH)
    Pivot pin kit (w/steel arm, spacers, Titanium and steel pivot bolts)
    Yellow Grey 195/330 secondary spring

Clutching Tools Link - (opens new window) With the purchase of a clutch kit any tool is 10 % discount and automatically configured into your order.  No need for discount code.

Elevation examples

24.7 gram pivot weight @ Sea Level

17.7 gram pivot weight @ 6500 feet

12.5 gram pivot weight @ 11000 feet


$436 CDN + applicable tax & shipping (Mail, Canadapost xpresspost w/tracking number)

Ship Canada, most provinces $45 to $55 depending on post code

Ship USA, most states $45 depending on post code.

Ship Euro/Scandinavia - $78~$88 depending on post code.


We're in Canada.  We dont sell in foreign currency.  If you buy a kit, you are paying in Canadian dollars.  Your bank and/or PayPal will convert Canadian to your foreign/local currency.  If you want to know an estimate of what your home currency is vs Canadian dollars go to the top of the page and click on the blue currency button.

Not separating a kit out.  Whole kit going out only. 

If you have a spring and/or pin or other part - yer getting a new one then.  At this time, we're not parting out a kit.  If you are a Dalton dealer and have the springs - does not matter - full kit.  Want just the helix, it comes with the rest of the kit - THEE END!