dalton primary clutch spring, skidoo primary clutch spring

Product Specifications

Dalton Secondary Spring for BRP

Red / Yellow

Forces 218/305 lbs

This spring I asked Dale to make for my 800etec summit clutch kits.  The start force of this spring is a little lower than the BRP purple 231 lbs.  Going from 231 to 218 loads the etec engine off the bottom end (slowing the engine down), helping the sled trench-less when you hammer the throttle in the steep & deep.

This secondary spring is a great "in between" the Dalton red 200/300 and the BRP 231/300 for anything from trail to mountains to race.